Home › Drivetrain › P314 HYBRID TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE BOX ASSEMBLY
(Click here)


2. REMOVE FRONT DOOR SCUFF PLATE LH


    B395175E01
  1. Disengage the 2 claws (A) in the direction indicated by the arrows (1) shown in the illustration.

  1. Disengage the 2 claws (B) in the direction indicated by the arrows (2) shown in the illustration.

  1. Disengage the 6 claws (C) to remove the front door scuff plate LH.



3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


    B278978
  1. Remove the clip.

  1. Pull the cowl side trim sub-assembly LH in the direction indicated by the arrow shown in the illustration to disengage the 2 clips and remove the cowl side trim sub-assembly LH.



4. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    B298720
  1. Disconnect the front door opening trim weatherstrip LH.



5. REMOVE INSTRUMENT SIDE PANEL LH


    B280320
  1. Using a moulding remover, disengage the 4 claws as shown in the illustration.



    B280322
  1. Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.



6. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    B279865
  1. Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.



7. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY


    B280327
  1. Remove the 2 bolts <B>.



    B281943
  1. Disengage the 5 clips and 3 guides to remove the instrument panel sub-assembly.



8. REMOVE FRONT DOOR SCUFF PLATE RH

HINT:
Use the same procedure as for the LH side.



9. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



10. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    B284920
  1. Disconnect the front door opening trim weatherstrip RH.



11. REMOVE INSTRUMENT SIDE PANEL RH


    B281763
  1. Using moulding remover, disengage the 4 claws as shown in the illustration.



    B281765
  1. Disengage the 3 guides to remove the instrument side panel RH as shown in the illustration.



12. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    B279888
  1. Disengage the 4 claws.

  1. Disengage the 2 guides.

  1. Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.



13. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    B281767
  1. Remove the bolt <B> and screw <C>.

  1. Open the lower instrument panel door.



    B281768
  1. Remove the 3 screws <C>.



    B281769
  1. Disengage the 2 clips, 4 guides and remove the lower instrument panel sub-assembly as shown in the illustration.



14. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


    B292378
  1. Disengage the 2 claws as shown in the illustration.

  1. Disconnect each connector to remove the front console upper panel garnish.



15. REMOVE FRONT ASH RECEPTACLE ASSEMBLY


    B281754
  1. Remove the 2 screws <C>.



    B281755
  1. Disengage the 2 clips as shown in the illustration.

  1. Disconnect each connector to remove the front ash receptacle assembly.



16. REMOVE FRONT NO. 2 CONSOLE BOX INSERT


    B281774
  1. Remove the 2 screws <C>.



    B281775
  1. Disengage the clip and 3 guides to remove the front No. 2 console box insert as shown in the illustration.



  1. for LHD:



      B280290
    1. Disengage the 2 claws to disconnect the room temperature sensor from the front No. 2 console box insert.



17. REMOVE CONSOLE BOX INSERT


    B281777
  1. Remove the 2 screws <C>.



    B281778
  1. Disengage the clip and 3 guides to remove the console box insert as shown in the illustration.



  1. for RHD:



      B281942
    1. Disengage the 2 claws to disconnect the room temperature sensor from the console box insert.



18. REMOVE FLOOR CARPET BRACKET LH


    E227160
  1. Remove the 2 clips.

  1. Disengage the 2 guides to remove the floor carpet bracket LH.



19. REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET


    C240460
  1. Remove the screw and No. 1 console box mounting bracket from the lower shift lever assembly.



20. REMOVE NO. 1 CONSOLE BOX DUCT


    C240461
  1. Remove the clip and No. 1 console box duct.



21. REMOVE LOWER SHIFT LEVER ASSEMBLY


    C239451
  1. Disconnect the end of transmission control cable assembly from the lower shift lever assembly.

  1. Disengage the 2 claws and disconnect the transmission control cable assembly from the lower shift lever assembly.



    C248294
  1. Disconnect the 3 clamps and connector.



    C239453
  1. Remove the 4 bolts and lower shift lever assembly.



22. REMOVE SHIFT LEVER SUPPORT


    C239454
  1. Remove the 4 bolts and shift lever support.