Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM

HYBRID BATTERY SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here



Hybrid Battery System 
Symptom
Suspected Area
See page
"Maintenance required for hybrid battery cooling parts at your dealer" is displayed on the multi-information display.*1
1. Make sure the air intake port is not blocked.
-
2. Make sure there are no gaps between the connecting parts of the ducts.
-
3. Clean the No. 1 hybrid battery intake filter.
Check for entry of foreign matter.
Click here
4. Clear the DTCs to reset the learning values even if no DTCs are stored.
Click here
Abnormal noise is heard from the ventilation holes in the rear side seatback assembly.
1. Make sure the air intake port is not blocked.
-
2. Make sure there are no gaps between the connecting parts of the ducts.
-
3. Clean the No. 1 hybrid battery intake filter.
Check for entry of foreign matter.
Click here

HINT:
*1: If the battery cooling blower assembly malfunctions, DTC P0A82-123, P0A84-123 or P0A85-123 will be stored. If only "Maintenance required for hybrid battery cooling parts at your dealer" is displayed on the multi-information display, perform the inspection of the HV battery cooling system intake port, filter and duct.