Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM

HYBRID CONTROL SYSTEM > VEHICLE CONTROL HISTORY

for Preparation Click here



VEHICLE CONTROL HISTORY
  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the GTS on.

  4. Enter the following menus: Powertrain / Hybrid Control / Utility / Vehicle Control History.

    Tester Display
    Measurement Item
    Diagnostic Note
    Battery Smart Unit Mismatch
    Displays if the wrong type of battery smart unit is installed.
    -