Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM

HYBRID CONTROL SYSTEM > P0A93-346 > Preparation



COOLANT
Capacity
Classification
3.2 liters (3.4 US qts, 2.8 Imp. qts)
Use only "TOYOTA Super Long Life Coolant" or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology consists of a combination of low phosphates and organic acids).


EQUIPMENT
Torque wrench
-
Auxiliary Battery
-
Tire lever
-
Clip remover
-
Insulated gloves
-
Tape
-
Plastic bag
-
Megohmmeter

NOTICE:
Be sure to set the megohmmeter to 500 V when performing this test. Using a setting higher than 500 V can result in damage to the component being inspected.

Milliohmmeter
-


RECOMMENDED TOOLS
I106023
09003-2C100
Insulated Tool Set
-
I106028
(09005-1C200)
Insulated Tool Case
-
I106024
(09012-4C100)
Insulated Deep Socket
8mm
-
I106025
(09012-4C110)
Insulated Deep Socket
10mm
-
I106026
(09021-1C200)
Insulated Ratchet Handle
-
I106027
(09072-2C100)
Insulated Torque Wrench
5-25N m
-
I104109
09061-1C300
Set, Moulding Remover
-
I104105
(09061-1C310)
Remover A, Moulding
-
I107015
09080-1C110
Toyota Electrical Tester Set
-
I107018
09080-2C100
Test Lead Set
-
I107023
09080-2C110
AC/DC400A Probe
-
I001802
09230-40010
Radiator Cap Tester
-
I010140
09231-40030
Radiator Cap Tester
Adapter Set C
-