Home
›
Drivetrain
›
DRIVE SHAFT / PROPELLER SHAFT
›
FRONT DRIVE SHAFT ASSEMBLY
FRONT DRIVE SHAFT ASSEMBLY > DISASSEMBLY > Preparation
SST
09527-10011
Rear Axle Shaft Bearing Remover
09950-00020
Bearing Remover
EQUIPMENT
Torque wrench
-
Protective tape
-
Protective glove
-
LUBRICANT / Front Drive Shaft Assembly
Item
Capacity
Outboard joint grease
205 to 215 g (7.23 to 7.58 oz.)
Inboard joint grease
175 to 185 g (6.17 to 6.52 oz.)
RECOMMENDED TOOLS
09012-2C540
Deep Socket Wrench
30mm
-
09042-1C500
Water Pump Pliers
-
09051-1C110
Plastic Hammer
-
09905-00012
Snap Ring No. 1 Expander
-