Home › Engine / Hybrid System › 2AR-FXE LUBRICATION › OIL PUMP

OIL PUMP > REMOVAL > Preparation



SST 
I000439
09213-54015
Crankshaft Pulley Holding Tool


I000032
09330-00021
Companion Flange Holding Tool


I031012
09950-50013
Puller C Set


I002191
(09951-05010)
Hanger 150


I002192
(09952-05010)
Slide Arm


I002194
(09953-05020)
Center Bolt 150


I031004
(09954-05011)
Claw No.1




EQUIPMENT
Container
-
Hose
-
Oil pressure gauge
-
Torque wrench
-
Protective tape
-
Wooden block
-
Vernier caliper
-


LUBRICANT / Standard Oil Grade
Oil Grade
Oil Viscosity (SAE)
API grade SL "energy-conserving", SM "energy-conserving", SN "resource-conserving" or ILSAC multigrade engine oil 0W-20 5W-20 5W-30 10W-30
API grade SL, SM or SN multigrade engine oil
15W-40 20W-50

LUBRICANT / Standard Capacity
Item
Specified Condition
Drain and refill with oil filter change
4.4 liters (4.6 US qts, 3.9 Imp. qts)
Drain and refill without oil filter change
4.0 liters (4.2 US qts, 3.5 Imp. qts)
Dry fill
5.3 liters (5.6 US qts, 4.7 Imp. qts)


RECOMMENDED TOOLS
I102194
09012-2C520
Deep Socket Wrench
24mm

-
I107015
09080-1C110
Toyota Electrical Tester Set


-
I107018
09080-2C100
Test Lead Set


-


SSM
Toyota genuine seal packing black, three bond 1207B or equivalent
-
Toyota genuine adhesive 1344, three bond 1344 or equivalent
-