WHEN REMOVING,INSTALLING OR REPLACING PARTS > PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED / RECONNECTED



Necessary Procedures
Effect / Inoperative Function When Necessary Procedures are not Performed
Correct the steering angle neutral point
Parking assist monitor system

NOTICE:
  1. After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 90 seconds before disconnecting the cable from the negative (-) battery terminal (for Radio and Display Type).
  2. After the ignition switch is turned off, the navigation receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 120 seconds before disconnecting the cable from the negative (-) battery terminal (for Navigation Receiver Type).