QUARTER PANEL END HOUSING > ASSEMBLY REPLACEMENT



  1. K101328

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100016
Remove Weld Points
K100022
Cut with Disc Sander etc.

K101329E02


K123083E02


INSTALLATION

Symbol meaning
K100019
Plug Weld
K100021
Plug Weld
INSTALLATION POINT
  1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
  2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)
  3. After welding, apply body sealer to the corresponding parts. (See the painting / coating)
  4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K101330E03


K123083E04