REAR FLOOR REAR INNER CROSSMEMBER > ASSEMBLY REPLACEMENT



  1. K101337
    With the body lower back panel removed.

REMOVAL

Symbol meaning
K100014
Remove Weld Points

K101338E02


INSTALLATION

Symbol meaning
K100019
Plug Weld
INSTALLATION POINT
  1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
  2. After welding, apply body sealer to the corresponding parts. (See the painting / coating)
  3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K101339E02