NAME PLATE > ATTACHMENT POSITION


  1. Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

    HINT:
    Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.

  2. Wipe off the remaining double-sided tape using a clean cloth or equivalent.

    NOTICE:
    If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.

  3. After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

    HINT:
    The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.


for TMMK Made

B400920E01



  1. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM



      B281357
    1. Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.



  2. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE



    1. Install the No. 2 luggage compartment door name plate as shown in the illustration.


      B381216E02


      Text in Illustration 
      *a
      Release Paper
      -
      -

      Standard Measurement 
      Area
      Measurement
      Area
      Measurement
      A
      24.4 mm (0.961 in.)
      B
      25.0 mm (0.984 in.)
      C
      47.1 mm (1.85 in.)
      -
      -



  3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE



    1. Install the No. 3 luggage compartment door name plate as shown in the illustration.


      B401769E01


      Text in Illustration 
      *a
      Release Paper
      -
      -

      Standard Measurement 
      Area
      Measurement
      Area
      Measurement
      A
      49.1 mm (1.93 in.)
      B
      44.7 mm (1.76 in.)
      C
      73.4 mm (2.89 in.)
      -
      -


for TMC, TMMR Made

B282050E02



  1. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM



      B282055
    1. Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.



  2. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE



    1. Install the No. 7 luggage compartment door name plate as shown in the illustration.


      B287429E01


      Text in Illustration 
      *1
      Profile of Luggage Compartment Door Panel
      -
      -
      Reference Measurement 
      Area
      Measurement
      A
      34.2 mm (1.35 in.)
      B
      34.1 mm (1.34 in.)
      C
      276.6 mm (10.89 in.)



  3. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE



    1. Install the No. 2 luggage compartment door name plate as shown in the illustration.


      B287430E01


      Text in Illustration 
      *1
      Profile of Luggage Compartment Door Panel
      -
      -
      Reference Measurement 
      Area
      Measurement
      A
      31.1 mm (1.22 in.)
      B
      35.7 mm (1.41 in.)
      C
      308.3 mm (1.01 ft.)



  4. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE



    1. Install the No. 3 luggage compartment door name plate as shown in the illustration.


      B282053E01


      Text in Illustration 
      *1
      Profile of Luggage Compartment Door Panel
      -
      -
      Reference Measurement 
      Area
      Measurement
      A
      82.3 mm (3.24 in.)
      B
      151.4 mm (5.96 in.)
      C
      82.3 mm (3.24 in.)