RADIATOR LOWER SUPPORT > ASSEMBLY REPLACEMENT


K101232

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100015
Remove Weld Points
K100016
Remove Weld Points
K100022
Cut with Disk Sander etc.
REMOVAL POINT (for TMMK Made)
  1. *1: Bolts.

K101233E02


K101234E02


K102107E02


K101234E03


INSTALLATION

Symbol meaning
K100019
Plug Weld
K100020
Plug Weld
K100021
Plug Weld
K100026
Fillet Weld
INSTALLATION POINT (for TMC, TMMR Made)
  1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  2. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.
  3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
INSTALLATION POINT (for TMMK Made)
  1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  2. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.
  3. *2: Bolts.
  4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K101235E02


K101236E02


K101236E03


K102110E02