BODY PANEL SEALING > APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    HINT:
    1. Apply degreasing agent to a clean cloth and clean the sealer application areas.
    2. After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rust-proof the areas by applying primer or equivalent. Then apply body sealer.
    3. If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the sealer immediately.


K100445
Flat Finishing
K100446
No Flat Finishing

for TMC, TMMR Made

K122843


K122844


K122845


K122846E01


K122847E01


K101379


K122848


for TMMK Made

K122855


K122856


K122857


K122858E01


K122859


K122860E01


K122861


K122869


K122870