SEAT ASSEMBLY (for TMMK Made) > DETAILS



FUNCTION


  1. Power Lumbar Support



    1. The driver seat uses a 2-way adjustable lumbar support. This support includes a plastic basket that is located near the lumbar area of the occupant, which pushes the seatback forward, thus providing uniform support from the upper back down to the pelvis for a better fit.


      Y179892E01


      Text in Illustration 
      *1
      Seatback Frame
      *2
      Plastic Basket
      *a
      Front-back Adjustment
      -
      -


CONSTRUCTION


  1. Rear Seat

    1. Foldable 60/40 separate type seats are provided as the rear seats. Folding a seatback forward allows access to the luggage compartment, increasing storage space.



    2. Pulling the knob (rear seat back lock sub-assembly) in the luggage compartment releases the lock (rear seat back lock sub-assembly) that secures the rear seat back. This makes it possible for the rear seat back to be folded forward from inside the cabin, allowing access to the luggage compartment.


      Y179893E01


      Text in Illustration 
      *1
      Knob (Rear Seat Back Lock Sub-assembly LH)
      *2
      Rear Seat Back Lock Sub-assembly LH
      *3
      Rear Seat Back Lock Sub-assembly RH
      *4
      Rear Seat Back LH
      *a
      Rear Seat Back Lock Sub-assembly LH Unlock Operation
      -
      -



  2. Child Restraint System

    1. ISO-FIX bars for securing child seats have been provided behind the seat cushion of the rear seat.



    2. CRS anchor brackets for securing a child seat have been provided on the package tray trim panel assembly.


      Y111687E01


      Text in Illustration 
      *1
      ISO-FIX Bars
      *2
      CRS Top Tether Anchor Bracket