MIRROR SYSTEM (for TMC, TMMR Made) > DETAILS |
| OPERATING CONDITION |
Mirror Heater Function
The mirror heaters are activated when the ignition switch is ON and the rear defogger switch is pushed. The air conditioning amplifier assembly operates the mirror heaters for approximately 15 minutes. Also, under the specified conditions*, the mirror heaters may be operated for up to an additional 45 minutes (maximum).
*: Vehicle speed is 45 km/h (28 mph) or more and the outside temperature is -3°C (27°F) or below.
Reverse-linked Function (Models with Reverse-linked Function)
This function operates when all of the following conditions are met:
Memory System (Mirror Surface Position Memory Function) (Models with Memory Function)
This function operates when any of the following conditions are met:
| FUNCTION |
The outer rear view mirrors have the following functions:
| Function | Outline | |
| Electric Remote Mirrors | Remote Control Function | The adjustment axis of the mirror surface of the electric remote mirrors can be controlled by using the outer mirror switch assembly. |
| Retract Function | This function retracts and returns the outer rear view mirrors when the retract switch is operated. | |
| Reverse-linked Function*1 | This function tilts the mirror surface downward to improve visibility when reversing. | |
| Mirror Heater Function |
| |
| Memory System*2 | The memory system can store the driver seat, outer rear view mirror and tilt & telescopic steering positions. Up to 2 memory positions can be stored in the system memory and recalled. | |