AUDIO AND VISUAL SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS

Component
Function
Radio Receiver Assembly*1
  1. Plays back audio from each audio source, such as radio and CD.
  2. Sends audio signals from each audio source to the speakers.
Radio and Display Receiver Assembly*2
  1. Plays back audio from each audio source, such as radio, CD and Bluetooth audio.
  2. Sends audio signals from each audio source to the speakers.*3
  3. Sends audio signals from each audio source to the stereo component amplifier assembly.*4
  4. Sends call information of a phone call received on a users' cellular phone connected via Bluetooth, to the combination meter assembly.
Navigation Receiver Assembly*5
  1. Plays back audio from each audio source, such as radio, CD and Bluetooth audio.
  2. Sends audio signals from each audio source to the speakers.*6
  3. Sends audio signals from each audio source to the stereo component amplifier assembly.*7
  4. Sends call information of a phone call received on a users' cellular phone connected via Bluetooth, to the combination meter assembly.
Window Glass Antenna Wire (Rear)
  1. AM
  2. FM
  3. FM-sub
Receives radio broadcasting signals (AM/FM/FM-sub).
No. 1 Amplifier Antenna Assembly
Amplifies radio broadcasting signals from the radio antenna and sends them to the radio receiver assembly*1, radio and display receiver assembly*2 or navigation receiver assembly*5.
Window Glass Antenna Wire (Front)*6
- Digital TV
Receives radio broadcasting signals (Digital TV).
Television Antenna Assembly*6
Amplifies digital TV broadcasting signals from the digital TV antenna and sends them to the navigation receiver assembly.
Steering Pad Switch Assembly
  1. Sends operation signals from switches such as the volume switch, mode switch and seek switch to the spiral cable with sensor sub-assembly.*1
  2. Sends operation signals from switches such as the volume switch, mode switch, 4 way switch, enter switch and back switch operation to the spiral cable with sensor sub-assembly.*8
Spiral Cable with Sensor Sub-assembly
Sends operation signals from the steering pad switch assembly to the radio receiver assembly*1, radio and display receiver assembly*2 or navigation receiver assembly*5.
Cooler Control Switch Assembly*9
Sends operation signals from switches such as the channel up/down switch, tune up/down switch, volume up/down switch, power switch and mode switch operation to the radio and display receiver assembly*2 or navigation receiver assembly*5.
Roof Console Box Assembly
Houses the manual (SOS) switch*11 and telephone microphone.
Telephone Microphone
Recognizes speech during a hands-free call or voice recognition system operation and sends the audio signal to the radio and display receiver assembly*12 or navigation receiver assembly*5 or telematics transceiver (data communication module)*11.
No. 1 Stereo Jack Adapter Assembly
  1. Sends audio signals to the radio receiver assembly*1, radio and display receiver assembly*2 or navigation receiver assembly*5 when an auxiliary device is connected.
  2. Communicates with the radio receiver assembly*1, radio and display receiver assembly*2 or navigation receiver assembly*5 via a USB communication line when a USB memory device, portable audio player (USB type) or Apple product is connected.
Combination Meter Assembly
  1. Sends vehicle speed signals to the radio receiver assembly*1, radio and display receiver assembly*2 or navigation receiver assembly*5, stereo component amplifier*4*10 or telematics transceiver (data communication module)*11.
  2. Displays call information, sent from the radio and display receiver assembly*2 or navigation receiver assembly*5, of a phone call received on a user's cellular phone.
Stereo Component Amplifier Assembly*4*10
Amplifies audio signals sent from the radio and display receiver assembly and sends them to the speakers.
Telematics Transceiver (Data Communication Module)*11
  1. Sends a part of audio signals sent from the radio and display receiver assembly to the speakers.
  2. Sends microphone voice signals sent from the telephone microphone to the radio and display receiver assembly.
  1. *1: Models with 6-speaker sound system
  2. *2: Models with multimedia system
  3. *3: Except models with multimedia system (with navigation ECU)
  4. *4: Models with multimedia system (with navigation ECU)
  5. *5: Models with navigation system
  6. *6: Destination package for Brazil and Argentina
  7. *7: Models for G.C.C. countries
  8. *8: Except models with 6-speaker sound system
  9. *9: Models with rear power seat system
  10. *10: Models for G.C.C. countries with navigation system
  11. *11: Models with manual (SOS) switch
  12. *12: Models with multimedia system and without manual (SOS) switch

FUNCTION
  1. Bluetooth Audio System

    1. The functions of the Bluetooth audio system that can be used vary with the version of the Audio/Video Remote Control Profile (AVRCP) supported by the Bluetooth audio player that is being used.

    2. The available Bluetooth audio system functions differ in accordance with each Audio/Video Remote Control Profile (AVRCP) as follows:

      Function
      Outline
      Audio/Video Remote Control Profile (AVRCP)
      Version 1.0
      Version 1.3
      Version 1.4 or higher
      Play
      Starts playing the music.
      ○
      ○
      ○
      Stop
      Stops playing the music.
      ○
      ○
      ○
      Pause
      Pauses the music.
      ○
      ○
      ○
      Track Up/Down
      Changes the track.
      ○
      ○
      ○
      Fast Up/Down
      Fast-forwards or reverses.
      ○
      ○
      ○
      Album Up/Down
      Changes the album.
      -
      ○
      ○
      Repeat (Single Repeat)
      Repeats the selected music.
      -
      ○
      ○
      Random (All Track Random)
      Plays all the music in the portable audio device at random.
      -
      ○
      ○
      Scan (All Track Scan)
      Scans all the music in the portable audio device.
      -
      ○
      ○
      Music Information
      Shows track number, playtime, track name, artist name and album name.
      -
      ○
      ○
      Remaining Battery Level
      Shows the remaining battery level of the Bluetooth audio player.
      -
      ○
      ○
      Music List
      Shows the music list.
      -
      -
      ○

      HINT:
      1. ○: Applicable
      2. -: Not applicable

    3. The functions of the Bluetooth audio system are shown in the following table:

      Function
      Outline
      Set Bluetooth Audio Player
      Registering a Bluetooth Audio Player
      In order to use the Bluetooth audio system with a Bluetooth audio player, it is necessary to register it to the audio head unit. Once a Bluetooth audio player is registered, the Bluetooth audio system connects automatically. The user can register up to 5* Bluetooth audio players.
      Deleting a Bluetooth Audio Player
      The user can delete a Bluetooth audio player.
      Connecting a Bluetooth Audio Player
      Enables the user to select whether to connect to a Bluetooth audio player automatically or manually. If a Bluetooth audio player has been registered and automatic connection is enabled, the Bluetooth audio player will be connected automatically.
      Change Settings of Bluetooth Audio
      Selecting a Bluetooth Audio Player
      If the user has registered a second Bluetooth audio player, either one can be selected for connection.
      Displaying Bluetooth Audio Player
      The user can view the information of the Bluetooth audio player on the system.
      Displaying the Bluetooth Audio Setting
      The user can see the Bluetooth audio information settings on the system.
      Changing the Device Name or Passcode
      The user can change a device name or a passcode.
      Initializing the Bluetooth Audio Settings
      The user can initialize the settings.

      1. *: The maximum number of Bluetooth devices that can be registered (including Bluetooth phones and Bluetooth audio players)

  2. Bluetooth Hands-free System

    1. Bluetooth is a short-distance, high-speed wireless data communication system that uses the 2.4 GHz frequency band prescribed by the Bluetooth SIG (Special Interest Group).

    2. This system enables drivers to place or receive phone calls without operating a cellular phone.

    3. The Bluetooth hands-free system is included in the audio head unit.

    4. The major hands-free functions are shown in the following table:

      Function
      Audio System
      Multimedia System
      Navigation System
      Calling with Bluetooth Phone
      By Dial Pad
      ○
      ○
      By Contacts
      ○
      (2500*1*2/1500*3*4 Items)
      ○*1
      (2500 Items)
      By Call History*5
      ○*2
      (30 Items)
      ○*6
      (30 Items)
      By Call History*5
      Dialed Number
      ○*4
      (15 Items)
      ○*7
      (10 Items)
      Received Call
      ○*4
      (15 Items)
      ○*7
      (10 Items)
      Missed Call
      ○*4
      (15 Items)
      ○*7
      (10 Items)
      All Call History
      ○*4
      (45 Items)
      ○*7
      (30 Items)
      By Favorites*5
      ○
      (15*2/200*4 Items)
      ○
      (15 Items)
      By Siri/Google Now
      ○*8
      -
      By Voice Recognition*5
      Dialing by Name
      ○*8
      -
      Dialing by Phone Number
      ○*8
      -
      Dialing by Voice Tag
      -
      ○
      By Point Of Interest (POI) Call
      ○*8
      ○
      By Short Message Service (SMS)/e-mail
      Mail Screen*5
      ○*4
      -
      By Selecting SOS Screen Button
      ○*8
      -
      By Using the Toyota Assistance
      ○*8
      -
      Receive with Bluetooth Phone/Talk on Bluetooth Phone
      Receiving Call*5
      Received Manually
      ○
      ○
      Refused
      ○
      ○
      Interrupt Call*5
      ○
      ○
      Tone Sending
      By Dialing
      ○
      ○
      By Registered Number*5
      ○*9
      -
      Receive and Reply Message with Bluetooth Phone
      Receive Message*5
      ○*4
      -
      Replying (Quick Reply)*5
      ○*4
      -
      Recognition/Connection
      Registering Bluetooth Phone
      ○
      (5*2/4*4 Bluetooth Phones)
      ○
      (5 Bluetooth Phones)
      Connecting Bluetooth Phone
      Connected Automatically*5
      ○
      ○
      Connected Manually*5
      ○
      ○
      Setting
      Setting Automatic Connection
      ○
      ○

      HINT:
      1. ○: Can be performed
      2. -: Not equipped
      3. *1: It is possible to have up to 2500 items per telephone (Bluetooth phone).
      4. *2: Except models for Russia
      5. *3: It is possible to have up to 1500 items per telephone (Bluetooth phone).
      6. *4: Models for Russia
      7. *5: Can be performed while driving.
      8. *6: Models for G.C.C. countries
      9. *7: Destination package for Brazil and Argentina
      10. *8: Models with multimedia system (with navigation ECU)
      11. *9: Destination package for Hong Kong and general countries

    5. The hands-free functions of the multimedia system are shown in the following table. However, for safety, some functions may not be selectable when the vehicle is being driven.

      Function
      Outline
      Calling with a Bluetooth Phone
      By Dial Pad
      The user can make a call by inputting a telephone number.
      By Contacts
      The user can make a call by using the contact data that has been transferred from the user's cellular phone. The user can register up to 2500*1/1500*2 items in the contact list.
      By Call History*1*3
      The user can make a call by selecting a telephone number from the entire call history.
      By Call History*2*3
      Dialed Number
      The user can make a call by selecting a previously dialed number. The system remembers up to 15 dialed numbers. If more than 15 numbers have been dialed, the oldest number will no longer be remembered.
      Received Call
      The user can make a call by selecting the telephone number of a received call. When a call is received, the system will remember the last 15 numbers. If more than 15 calls have been received, the oldest number will no longer be remembered.
      Missed Call
      The user can make a call by selecting the telephone number of a missed call. The system remembers up to 15 missed call numbers. If more than 15 calls have been missed, the oldest number will no longer be remembered.
      All Call History
      The user can make a call by selecting a telephone number from the entire call history. However, the number of telephone numbers in the call history that the user can use is limited while driving.
      By Favorites*1*3
      The user can make a call by using a registered contact selected from the contact list, dialed numbers or received calls.
      By Siri/Google Now*4
      The user can make a call to a person searched for using the Siri/Google Now function.
      By Voice Recognition
      (Dialing by Name)*3*4
      The user can make a call by saying a name registered in the contact list.
      By Voice Recognition
      (Dialing by Phone Number)*3*4
      The user can make a call by saying a desired number.
      By Point of Interest (POI)*4
      The user can make a call by operating a switch when "Call" is displayed on the navigation screen.
      By Short Message Service (SMS)/e-mail (mail screen)*2*3
      The user can make a call by operating a switch when "Call sender" is displayed on the mail screen.
      By Selecting SOS Screen Button*4
      The user can make a 112 emergency call by operating a switch when "SOS" is displayed on the dial screen. This call can only be placed in a country where the 112 emergency call service is available.
      By Using the Toyota Assistance*4
      The user can make a call to Toyota Assistance service by operating a switch when "Call Assistance" is displayed on the Toyota Assistance screen.
      Receiving a Call using a Bluetooth Phone*3
      When a call is received, the incoming call screen is displayed with a sound.
      Talking on a Bluetooth Phone*3
      While the user is talking on the phone, the talking screen is displayed.
      Changing Bluetooth Phone Settings
      Favorites Registration
      The user can register contacts, dialed numbers or received calls. Up to 15*1/200*2 favorite contacts can be registered.
      Volume Settings
      The user can set the volume.
      Contact Settings
      Transferring a telephone number:
      The user can transfer telephone numbers from a Bluetooth phone to the system. Up to 2500*1/1500*2 items (up to 4 numbers per entry) can be registered in the contact list.
      Automatically transferring a telephone number*1:
      When a PBAP compatible phone is connected, the phonebook data of the phone can be automatically transferred.
      Registering phone numbers:
      The user can register phone numbers in the contact list.*6
      Adding data to the contact list*1:
      The user can add data to the contact list.*6
      Editing data:
      The user can edit the registered data.*6
      Deleting data*1:
      The user can delete the data.*6
      Screen Settings*1
      Receiving call display:
      The user can change the receiving call display setting.*5
      Contact data and call history data transfer condition:
      The user can select whether a message is displayed or not after contact data and call history data are transferred.
      The Bluetooth connection status at startup:
      When the ignition switch is turned to ACC or ON and a Bluetooth phone is automatically connected, the connection check will be displayed.*5
      Initializing the settings:
      The user can initialize the settings.
      Registering and Selecting a Bluetooth Phone
      Bluetooth Phone Registration
      In order to use the hands-free function of a Bluetooth phone, it is necessary to register it to the audio head unit. Once a Bluetooth phone is registered, it connects automatically. The user can register up to 5*1/4*2 Bluetooth phones.*7
      Bluetooth Phone Selection*3
      When 2 or more registered Bluetooth phones are in the cabin, it is necessary to select which phone to use. Only the selected phone is available for use as a hands-free phone. The phone registered last is automatically selected.
      Bluetooth Information Confirmation and Editing
      The user can set, change and initialize the information of the Bluetooth phone displayed on the screen.
      Deleting a Bluetooth Phone
      The user can delete a registered Bluetooth phone from the audio head unit.
      Bluetooth Phone Message*2*8
      Checking Message
      Transmits the messages (Short Message Service (SMS)/e-mail) received on the Bluetooth phone to the audio head unit.
      The following functions are available for the transmitted messages.
      1. Display of message text.
      2. Calling a Short Message Service (SMS)/e-mail message sender's phone number.*3
      Reply Message*3
      Replies to a message (Short Message Service (SMS)/e-mail) received on the Bluetooth phone.
      Editing Reply Message
      Edits the reply.
      Displaying Mail List*3
      Displays the list of received messages (Short Message Service (SMS)/e-mail). However, the number of received messages in the list that the user can view is limited while driving.

      1. *1: Except models for Russia
      2. *2: Models for Russia
      3. *3: Can be operated while driving.
      4. *4: Models with multimedia system (with navigation ECU)
      5. *5: Destination package for Hong Kong
      6. *6: PBAP non-compatible phone, or PBAP compatible phone with the automatic telephone number transfer function set to off.
      7. *7: The maximum number of Bluetooth devices that can be registered (including Bluetooth phones and Bluetooth audio players).
      8. *8: Depending on the phone connected, some message services (checking or replying to messages, or displaying mail list) are not available.

    6. The hands-free functions of the navigation system are shown in the following table. However, for safety, some functions may not be selectable when the vehicle is being driven.

      Function
      Outline
      Calling with a Bluetooth Phone
      By Dial Pad
      The user can make a call by inputting a telephone number.
      By Contacts
      The user can make a call by using the contact data that has been transferred from the user's cellular phone. The user can register up to 2500 items in the contact list.
      By Call History*1*2
      The user can make a call by selecting a telephone number from the entire call history. However, the number of telephone numbers in the call history that the user can use is limited while driving.
      By Call History*1*3
      Dialed Number
      The user can make a call by selecting a previously dialed number. The system remembers up to 10 dialed numbers. If more than 10 numbers have been dialed, the oldest number will no longer be remembered.
      Received Call
      The user can make a call by selecting the telephone number of a received call. When a call is received, the system will remember the last 10 numbers. If more than 10 calls have been received, the oldest number will no longer be remembered.
      Missed Call
      The user can make a call by selecting the telephone number of a missed call. The system remembers up to 10 missed call numbers. If more than 10 calls have been missed, the oldest number will no longer be remembered.
      All Call History
      The user can make a call by selecting a telephone number from the entire call history. However, the number of telephone numbers in the call history that the user can use is limited while driving.
      By Favorites*1
      The user can make a call by using a registered contact selected from the contact list, dialed numbers or received calls
      By Voice Recognition
      (Dialing by Voice Tag)
      The user can make a call by saying a registered voice tag.
      By Point of Interest (POI)
      The user can make a call by operating a switch when "Call" is displayed on the navigation screen.
      Receiving a Call using a Bluetooth Phone*1
      When a call is received, the incoming call screen is displayed with a sound.
      Talking on a Bluetooth Phone*1
      While the user is talking on the phone, the talking screen is displayed.
      Changing Bluetooth Phone Settings
      Favorites Registration
      The user can register contacts, dialed numbers or received calls. Up to 15 favorite contacts can be registered.
      Volume Settings
      The user can set the volume.
      Contact Settings
      Transferring a telephone number:
      The user can transfer telephone numbers from a Bluetooth phone to the system. Up to 2500 items (up to 5 numbers per entry) can be registered in the contact list.
      Automatically transferring a telephone number:
      When a PBAP compatible phone is connected, the phonebook data of the phone can be automatically transferred.
      Registering phone numbers:
      The user can register phone numbers in the contact list.*4
      Adding data to the contact list:
      The user can add data to the contact list.*4
      Editing data:
      The user can edit the registered data.*4
      Deleting data:
      The user can delete the data.*4
      Screen Settings
      Receiving call display:
      The user can change the receiving call display setting.
      Contact data and call history data transfer condition:
      The user can select whether a message is displayed or not after contact data and call history data are transferred.
      The Bluetooth connection status at startup:
      When the ignition switch is turned to ACC or ON and a Bluetooth phone is automatically connected, the connection check will be displayed.
      Initializing the settings:
      The user can initialize the settings.
      Registering and Selecting a Bluetooth Phone
      Bluetooth Phone Registration
      In order to use the hands-free function of a Bluetooth phone, it is necessary to register it to the audio head unit. Once a Bluetooth phone is registered, it connects automatically. The user can register up to 5 Bluetooth phones.*5
      Bluetooth Phone Selection*1
      When 2 or more registered Bluetooth phones are in the cabin, it is necessary to select which phone to use. Only the selected phone is available for use as a hands-free phone. The phone registered last is automatically selected.
      Bluetooth Information Confirmation and Editing
      The user can set, change and initialize the information of the Bluetooth phone displayed on the screen.
      Deleting a Bluetooth Phone
      The user can delete a registered Bluetooth phone from the audio head unit.

      1. *1: Can be operated while driving.
      2. *2: Models for G.C.C. countries
      3. *3: Destination package for Brazil and Argentina
      4. *4: PBAP non-compatible phone, or PBAP compatible phone with the automatic telephone number transfer function set to off.
      5. *5: The maximum number of Bluetooth devices that can be registered (including Bluetooth phones and Bluetooth audio players).


DIAGNOSIS
  1. For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.