FEATURES > PERFORMANCE



OUTLINE


  1. 2AR-FE Engine



    1. The 2AR-FE engine is an in-line 4-cylinder 2.5-liter, 16-valve DOHC engine. This engine uses a Dual Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.


      V101552


      Item
      Specification
      No. of Cyls. & Arrangement
      4-cylinder, In-line
      Valve Mechanism
      16-valve DOHC with Dual VVT-i
      Fuel System
      SFI
      Displacement
      cm3 (cu. in.)
      2494 (152.2)
      Max. Output (EEC)
      kW@rpm
      133@6000
      Max. Torque (EEC)
      N*m@rpm
      231@4100



  2. 2GR-FE Engine



    1. The 2GR-FE engine is a 3.5-liter, 24-valve DOHC V6 engine. This engine uses a Dual VVT-i (Variable Valve Timing-intelligent) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.


      V101553


      Item
      Specification
      No. of Cyls. & Arrangement
      6-cylinder, V-type
      Valve Mechanism
      24-valve DOHC with Dual VVT-i
      Fuel System
      SFI
      Displacement
      cm3 (cu. in.)
      3456 (210.9)
      Max. Output (EEC)
      kW@rpm
      204@6200*1
      184@6200*2
      Max. Torque (EEC)
      N*m@rpm
      346@4700

      HINT:
      *1: TMMR production models for Kazakhstan and TMC production models
      *2: TMMR production models except for Kazakhstan

  3. 6AR-FSE Engine

    1. The 6AR-FSE engine is an in-line 4-cylinder, 2.0 liter, 16 valve DOHC engine. This engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine Superior version (D-4S) system, Variable Valve Timing-intelligent Wide (VVT-iW) system, Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. Thus, improved engine performance, quietness, fuel economy, and cleaner emissions have been achieved.

      Item
      Specification
      No. of Cyls. & Arrangement
      4-cylinder, In-line
      Valve Mechanism
      16-valve DOHC, Chain Drive
      (With VVT-iW and VVT-i)
      Fuel System
      Sequential Multiport Fuel Injection (SFI) D-4S
      Displacement
      cm3 (cu. in.)
      1998 (121.9)
      Max. Output (EEC)
      kW@rpm
      110@6500
      Max. Torque (EEC)
      N*m@rpm
      199@4600



  4. U660E Automatic Transaxle



    1. A U660E 6-speed multi-mode automatic transaxle is used.


      V101542


      Transaxle Type
      U660E
      Combination with Engine
      2GR-FE
      Gear Ratio
      1st
      3.300
      2nd
      1.900
      3rd
      1.420
      4th
      1.000
      5th
      0.713
      6th
      0.608
      Reverse
      4.148
      Differential Gear Ratio*
      3.458
      *: Counter gear ratio included

  5. U760E and U761E Automatic Transaxle

    1. A U760E and U761E 6-speed multi-mode automatic transaxles are used.

      Transaxle Type
      U760E
      U761E
      Combination with Engine
      2AR-FE
      6AR-FSE
      Gear Ratio
      1st
      3.300
      3.300
      2nd
      1.900
      1.900
      3rd
      1.420
      1.420
      4th
      1.000
      1.000
      5th
      0.713
      0.713
      6th
      0.608
      0.608
      Reverse
      4.148
      4.148
      Differential Gear Ratio*
      3.815
      3.815
      *: Counter gear ratio included



  6. Suspension

    1. A MacPherson strut type independent suspension is used for the front.



    2. A dual link MacPherson strut type independent suspension is used for the rear.


      V113456



  7. Steering



    1. The Electric Power Steering (EPS) system uses a power steering motor, a power steering torque sensor and a reduction mechanism that are built into the steering column assembly to generate assist torque, in order to assist the driver's steering effort.


      V113457E01


      Text in Illustration 
      *1
      Steering Gear Assembly
      *2
      Steering Column Assembly

  8. Brake

    Item
    Specification
    Front Brake
    Type
    Ventilated Disc
    Rotor Size (D x T)*
    mm (in.)
    296 x 28 (11.65 x 1.10)
    Rear Brake
    Type
    Solid Disc
    Rotor Size (D x T)*
    mm (in.)
    281 x 10 (11.06 x 0.39)
    Brake Control System
    ABS with EBD, Brake Assist, TRC, and VSC
    *: Diameter x Thickness