METER / GAUGE SYSTEM > GENERAL |
| OUTLINE |
Combination Meter Assembly
A combination meter assembly, which has a color type multi-information display, is provided.
The combination meter assembly has a built-in meter ECU and a buzzer.

| *1 | Rheostat Switch | *2 | Multi-information Display |
| *3 | ODO/TRIP Switch | - | - |
| *a | The illustration shown is an example only. | - | - |

| *1 | Rheostat Switch | *2 | Multi-information Display |
| *3 | ODO/TRIP Switch | - | - |
| *a | The illustration shown is an example only. | - | - |
| MAJOR DIFFERENCE |
The new models have been modified from the previous models as shown below:
A tire pressure warning light has been added (TMMK made models).
| MAIN FEATURES |
Opening/Ending Ceremony (Except TMMK Made Models)
An opening/ending ceremony which allows for anticipation of a pleasant drive is used. The ceremony operates as follows:

| *a | IG ON | *b | IG OFF |
| *c | The illustrations shown are examples only. | - | - |
Opening/Ending Ceremony (TMMK Made Models)
An opening/ending ceremony which allows for anticipation of a pleasant drive is used. The ceremony operates as follows:

| *a | IG ON | *b | IG OFF |
| *c | The illustrations shown are examples only. | - | - |
Multi-information Display
The multi-information display is located at the center of the combination meter assembly.
The multi-information display shows the following information.
| Item | Outline |
| Shift Position Indicator | The current shift position is displayed. |
| Outside Temperature |
|
| Indicator | When the display conditions are met, the following indicators illuminate.
|
| Information | The following information can be displayed on the multi-information display by switching the tabs.
|
| Operation Guide*3 | When the cruise control system is operated, the operation result is displayed. |
| Vehicle Power Source State*3 | Smart Indicator is displayed on the multi-information display. |
| ODO/TRIP Meter |
|
| Warning Message | A warning display will interrupt the current display on the multi-information display immediately when a warning is necessary. |
| Light Control Rheostat | Meter panel luminance can be changed by using the rheostat switch. |
The drive information shows the following information.
| Item | Outline |
| Drive Information*1 |
|
| Drive Information*2 |
|
When navigation information is being displayed, current navigation information (turn-by-turn, straight guidance or direction meter) will be displayed.*
*: Models with navigation system or multimedia system (with navigation ECU)
| PRECAUTION |
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |