METER / GAUGE SYSTEM > DETAILS



OPERATING CONDITION
  1. Eco Driving Indicator Light Operation

    1. Eco Driving Indicator Light can operate when all of the following conditions are met:

      1. The ignition switch is ON and the engine is running.
      2. The vehicle is being driven with the shift lever in D.
      3. Temporary S mode is not selected.
      4. The vehicle is at a speed of 130 km/h (81 mph) or below.


FUNCTION
  1. Combination Meter Assembly

    1. Buzzer Function

      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

      1
      Driver Seat Belt Warning (Maximum 5 Times)*1
      2
      Front Seat Belt Warning (Once)*1
      3
      Front Seat Belt Warning (Level 2)*1
      4
      Seat Belt Warning (Level 2)*2
      5
      Front Seat Belt Warning (Level 1)*1
      6
      Seat Belt Warning (Level 1)*2
      7
      EPS Warning
      8
      Smart Entry and Start System Warning (Continuous)*3
      9
      Smart Entry and Start System Warning (Intermittent)*3
      10
      Key Reminder Indicating*4
      11
      Smart Entry and Start System Warning (Continuous, 9 times at the maximum)*3
      12
      Smart Entry and Start System Warning (Once)*3
      13
      Multi-information Display Warning
      14
      Immobiliser Certification Reminder
      15
      Speed Warning*1
      16
      Parking Brake Engaged Warning
      17
      Door Open while Driving Warning
      18
      Sport Shift Reject Warning
      19
      Turn Signal/Hazard Warning Operation
      -
      -
      1. *1: TMMK Made Models
      2. *2: Except TMMK Made Models
      3. *3: Models with smart entry and start system
      4. *4: Models without smart entry and start system



  2. Multi-information Display

    1. Display Function Flow


      1. The multi-information display can be switched as shown in the flow chart below:


        Y179488E01


        No.
        Display Change Condition
        *a
        Conditions are met.
        *b
        Conditions are not met.
        *c
        If there are multiple display requests, items will be displayed in sequence.
        *d
        An item or display is selected by operating the steering pad switch.
        *e
        After ignition switch ON.
        *f
        The Eco Drive Level or Trip Summary (ending) display is displayed for a certain period of time after the ignition switch is turned off.



    2. Information Display Tab Operation

      1. The information currently displayed can be switched using the RIGHT (PAGE) switch of the steering pad switch assembly.

      Y179489E01


      Text in Illustration (Except TMMK Made Models:) 
      *A
      Models with Navigation System or Multimedia System (with Navigation ECU)
      *B
      Models with Cruise Control System
      *1
      Steering Pad Switch Assembly
      *2
      RIGHT (PAGE) Switch
      *3
      Drive information
      *4
      Navigation Information
      *5
      Cruise Control System Information
      *6
      Warning Message
      *7
      Settings
      -
      -
      *a
      The illustrations shown are examples only.
      -
      -
      V100136
      RIGHT (PAGE) switch operation
      -
      -

      Y179490E01


      Text in Illustration (TMMK Made Models:) 
      *A
      Models with Navigation System
      -
      -
      *1
      Steering Pad Switch Assembly
      *2
      RIGHT (PAGE) Switch
      *3
      Drive information
      *4
      Navigation Information
      *5
      Warning Message
      *6
      Settings
      *a
      The illustrations shown are examples only.
      -
      -
      V100136
      RIGHT (PAGE) switch operation
      -
      -



    3. Drive Information Mode Function

      1. The drive information tab shows vehicle information such as drivable range and fuel consumption.

      2. The drive information display can be changed by using the UP/DOWN switch of the steering pad switch assembly.


        Y150838E01


        Text in Illustration (Except TMMK Made Models:) 
        *1
        Steering Pad Switch Assembly
        *2
        UP Switch
        *3
        DOWN Switch
        *4
        Drive Information 1
        *5
        Drive Information 2
        *6
        Drive Information 3
        *7
        Blank
        -
        -
        *a
        The illustrations shown are examples only.
        -
        -
        V100136
        DOWN switch operation
        V100135
        UP switch operation

      Y179491E01


      Text in Illustration (TMMK Made Models:) 
      *1
      Steering Pad Switch Assembly
      *2
      UP Switch
      *3
      DOWN Switch
      *4
      Drive Information 1
      *5
      Drive Information 2
      *6
      Drive Information 3
      *7
      Blank
      -
      -
      *a
      The illustrations shown are examples only.
      -
      -
      V100136
      DOWN switch operation
      V100135
      UP switch operation

    4. Eco Drive Level (Except TMMS Made Models)

      1. The eco drive level changes among 5 levels to indicate the average fuel consumption and current fuel consumption.
      2. After the ignition switch is turned off, the eco drive level display appears for 3 seconds in the multi-information display. When the average fuel consumption is 7.7 L/100 km or less or 13 km/L or higher, the "EXCELLENT!" message flashes.

        Average Fuel Consumption Level
        Multi-information Display (L/100 km)
        Multi-information Display (km/L)
        Level 0
        (15 L/100 km or higher, or 5 km/L or less)
        Y150839
        Y150846
        Level 1
        (13 to 15 L/100 km, or 5 to 7.5 km/L)
        Y150840
        Y150847
        Level 2
        (11 to 13 L/100 km, or 7.5 to 10 km/L)
        Y150841
        Y150848
        Level 3
        (9 to 11 L/100 km, or 10 to 12.5 km/L)
        Y150842
        Y150849
        Level 4
        (7 to 9 L/100 km, or 12.5 to 15 km/L)
        Y150843
        Y150850
        Level 5
        (7 L/100 km or less, or 15 km/L or higher)
        When driving
        Y150844
        Y150851
        After ignition switch is turned off
        Y150845
        Y150852

    5. Setting Function

      1. The items displayed on the multi-information display can be customized.
      2. The following items can be selected on the information setting screen.

      Item
      Available Setting
      Language
      The language used on the multi-information display can be selected:
      1. English (Default*1)
      2. Russian*2 (Default*2)
      3. French*1
      4. Spanish*1
      Unit
      The unit displayed on the multi-information display can be selected:
      1. km (L/100 km) (Default*3)
      2. km (km/L) (Default*4)
      3. miles (MPG (US))*4
      4. miles (MPG (Imperial))*4
      5. °C (Default)*4
      6. °F*4
      Drive Information 1*4
      2 items can be selected among the following:
      1. Current Fuel Consumption (Bar Display)
      2. Total Average Fuel Consumption between Reset Operations
      3. Average Fuel Consumption after Engine Start-up
      4. Average Fuel Consumption after Refueling
      5. Total Average Vehicle Speed between Reset Operations
      6. Average Vehicle Speed after Engine Start-up
      7. Total Elapsed Time between Reset Operations
      8. Elapsed Time after Engine Start-up
      9. Cruising Range (Default of lower area)
      10. Cruising Range after Engine Start-up
      11. Total Cruising Range between Reset Operations
      12. Vehicle Speed (Digital Display) (Default of upper area)
      13. Blank
      Drive Information 2*4
      2 items can be selected among the following:
      1. Current Fuel Consumption (Bar Display) (Default of lower area)
      2. Total Average Fuel Consumption between Reset Operations (Default of upper area)
      3. Average Fuel Consumption after Engine Start-up
      4. Average Fuel Consumption after Refueling
      5. Total Average Vehicle Speed between Reset Operations
      6. Average Vehicle Speed after Engine Start-up
      7. Total Elapsed Time between Reset Operations
      8. Elapsed Time after Engine Start-up
      9. Cruising Range
      10. Cruising Range after Engine Start-up
      11. Total Cruising Range between Reset Operations
      12. Vehicle Speed (Digital Display)
      13. Blank
      Drive Information 3*4
      2 items can be selected among the following:
      1. Current Fuel Consumption (Bar Display)
      2. Total Average Fuel Consumption between Reset Operations
      3. Average Fuel Consumption after Engine Start-up
      4. Average Fuel Consumption after Refueling
      5. Total Average Vehicle Speed between Reset Operations
      6. Average Vehicle Speed after Engine Start-up
      7. Total Elapsed Time between Reset Operations (Default of lower area)
      8. Elapsed Time after Engine Start-up
      9. Cruising Range
      10. Cruising Range after Engine Start-up
      11. Total Cruising Range between Reset Operations (Default of upper area)
      12. Vehicle Speed (Digital Display)
      13. Blank
      Drive Information 3*3
      2 items can be selected among the following:
      1. Current Fuel Consumption (Bar Display)
      2. Total Average Fuel Consumption between Reset Operations
      3. Average Fuel Consumption after Engine Start-up
      4. Total Average Vehicle Speed between Reset Operations (Default of lower area)
      5. Average Vehicle Speed after Engine Start-up
      6. Total Elapsed Time between Reset Operations
      7. Elapsed Time after Engine Start-up
      8. Cruising Range (Default of upper area)
      9. Cruising Range after Engine Start-up
      10. Total Cruising Range between Reset Operations
      11. Blank
      Eco Driving Indicator Light
      The Eco Driving Indicator Light can be switched:
      1. ON (Default*3)
      2. OFF (Default*4)
      Interruption Display
      The following displays that appear as soon as the set conditions are met can be switched to ON (default) or OFF:
      1. Turn-by-turn Navigation Display*5
      2. Incoming Telephone Display
      3. Cruise Control Switch Operation Guide*4
      4. Rheostat
      5. Shift Position Indicator*4
      Accent Color
      The accent color can be changed:
      1. Clear Blue (Default)
      2. Clear Turquoise
      3. Deep Orange
      4. Radiant Orange
      Initialization
      The set items can be initialized.
      *1: Except models for Russia
      *2: Models for Russia
      *3: Except TMMK Made Models
      *4: TMMK Made Models
      *5: Models with navigation system or multimedia system (with navigation ECU)

    6. Warning Mode Function

      1. When a warning is necessary, the warning display interrupts the current display on the multi-information display.
      2. The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

      Except TMMK Made Models 
      Priority
      Display
      Master Warning Light
      Buzzer
      1
      Door open (while driving) (image display)*1
      Blinks
      Sounds
      Door open (image display)
      -
      -
      Clearance sonar detection (image display)*2
      -
      -
      Check Park Sonar System*2
      Illuminates
      -
      Clean Park Sonar*2
      Illuminates
      -
      2
      Auto Power OFF to Conserve Battery
      -
      -
      3
      Shift to P position when parked
      Blinks
      Sounds
      4
      Release Parking Brake
      Blinks
      Sounds
      Key not detected*3
      Blinks
      Sounds
      5
      Charging System Malfunction
      See Owner's Manual
      -
      -
      Check Entry & Start System*3
      Blinks
      Sounds
      BSM not available*4
      Illuminates
      Sounds
      Check Cruise Control System*5
      Illuminates
      Sounds
      Check BSM System*4
      Illuminates
      Sounds
      Engine Oil Pressure Low
      Illuminates
      Sounds
      6
      Turn Power OFF*3
      Blinks
      Sounds
      Key detected in vehicle*3
      Blinks
      Sounds
      Moon Roof opened*6
      Blinks
      Sounds
      Depress brake pedal, touch engine switch with key*3
      Blinks
      Sounds
      Depress brake pedal and push engine switch to start*3
      Blinks
      Sounds
      Shift to P position to start
      Blinks
      Sounds
      7
      Steering Lock active
      Blinks
      Sounds
      8
      Key Battery Low*3
      Illuminates
      Sounds
      Check Headlight System*7
      Illuminates
      Sounds
      Engine Oil Level Low*8
      Illuminates
      Sounds
      9
      Washer Fluid Low
      -
      -
      Fuel Low
      -
      -
      TRC OFF
      -
      -
      Power ON*3
      -
      -
      Depress brake pedal and push engine switch to start
      -
      -
      1. *1: If the vehicle has reached a speed of 5 km/h (3 mph)
      2. *2: Models with TOYOTA parking assist-sensor system
      3. *3: Models with smart entry and start system
      4. *4: Models with blind spot monitor system
      5. *5: Models with cruise control system
      6. *6: Models with sliding roof system
      7. *7: Models with automatic headlight beam level control system or automatic high beam system
      8. *8: Models with 6AR-FSE engine

      TMMK Made Models 
      Priority
      Display
      Master Warning Light
      Buzzer
      1
      Door open (while driving) (image display)*1
      Blinks
      Sounds
      Door open (image display)
      -
      -
      2
      Shift to P position
      Blinks
      Sounds
      3
      Check Electronic Power Steering System
      Illuminates
      Sounds
      Release Parking Brake
      Blinks
      Sounds
      Key Not Detected
      Blinks
      Sounds
      4
      Check Anti-lock Brake System
      -
      Sounds
      Check Vehicle Stability Control System
      -
      -
      Check Brake System
      -
      -
      Engine Coolant Temp is High
      Illuminates
      Sounds
      Check Charging System
      -
      -
      Smart Entry & Start System Check
      Blinks
      Sounds
      Check Cruise Control System
      Illuminates
      Sounds
      Low Oil Pressure
      Illuminates
      Sounds
      5
      Turn Power OFF
      Blinks
      Sounds
      Key Detected in Vehicle
      Blinks
      Sounds
      Turn Headlights OFF
      Blinks
      Sounds
      Moon Roof Open*2
      Blinks
      Sounds
      Key Battery Low
      Engine Start:
      Press Brake Pedal, Push Engine Switch with Key
      Blinks
      Sounds
      Key Battery Low
      Accessory Mode:
      Push Engine Switch with Key
      Blinks
      Sounds
      Engine Start:
      Press Brake Pedal and Push Engine Switch
      Blinks
      Sounds
      Accessory Mode:
      Push Engine Switch
      Blinks
      Sounds
      Shift to P Position to Start
      Blinks
      Sounds
      6
      Steering Lock ON
      Blinks
      Sounds
      Key Battery Low
      Illuminates
      Sounds
      7
      Check Headlight Leveling System
      Illuminates
      Sounds
      Check Headlight System
      Blinks
      Sounds
      8
      Low Washer Fluid
      -
      -
      Low Fuel
      -
      -
      Traction Control OFF
      -
      -
      Power ON
      -
      -
      Smart key symbol
      -
      -
      1. *1: If the vehicle has reached a speed of 5 km/h (3 mph)
      2. *2: Models with sliding roof system