Home › Audio / Visual / Telematics › TELEMATICS › MAYDAY BATTERY

MAYDAY BATTERY > INSTALLATION

for Preparation Click here



1. INSTALL MAYDAY BATTERY


  1. Connect the connector and install a new battery with the "TOP" mark facing upward as shown in the illustration.


    E348632E01


    Text in Illustration 
    *a
    Install in this Direction (1)
    *b
    Install in this Direction (2)

    NOTICE:
    Make sure that the connector is connected securely.



    E348630E01
  1. Engage the 3 guides and 2 claws as shown in the illustration.
    Text in Illustration 
    *a
    Install in this Direction (1)
    *b
    Install in this Direction (2)

  1. Install a new battery cover sub-assembly with the 2 screws.

    NOTICE:
    Make sure that the battery cover sub-assembly is securely installed.



2. INSTALL TELEMATICS TRANSCEIVER
(Click here)