Home › Audio / Visual / Telematics › TELEMATICS › MAYDAY BATTERY

MAYDAY BATTERY > REMOVAL

for Preparation Click here



1. REMOVE TELEMATICS TRANSCEIVER
(Click here)


2. REMOVE MAYDAY BATTERY


    E348629E01
  1. Loosen the 2 screws.
    Text in Illustration 
    *a
    Remove in this Direction (1)
    *b
    Remove in this Direction (2)

    HINT:
    The 2 screws cannot be removed because they are integrated into the battery cover sub-assembly.

  1. Disengage the 2 claws and 3 guides as shown in the illustration to remove the battery cover sub-assembly.



  1. Lift the battery, disconnect the connector and remove the battery as shown in the illustration.


    E348631E01


    Text in Illustration 
    *a
    Remove in this Direction (1)
    *b
    Remove in this Direction (2)