Home › Brake › PARKING BRAKE › PARKING BRAKE ASSEMBLY (for TMMK Made)

PARKING BRAKE ASSEMBLY (for TMMK Made) > DISASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. REMOVE REAR WHEEL


2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY


    C083014
  1. Remove the bolt and separate the rear flexible hose from the rear shock absorber assembly.

  1. Remove the 2 bolts, and separate the rear disc brake caliper assembly.

    NOTICE:
    Use wire or an equivalent tool to keep the rear disc brake caliper assembly from hanging down by the rear flexible hose.



3. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG


4. REMOVE REAR DISC


    C238505E01
  1. Put matchmarks on the rear disc and the rear axle hub.
    Text in Illustration 
    *a
    Matchmark



    C201774
  1. Release the parking brake and remove the rear disc.

    HINT:
    If the disc cannot be removed easily, use a screwdriver to turn the shoe adjuster as shown in the illustration in order to contract the parking brake shoes.



5. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Front Side)


    C237815
  1. Remove the parking brake shoe return tension spring.



6. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Rear Side)


    C237816
  1. Remove the parking brake shoe return tension spring.



7. REMOVE PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for Front Side)


    C237817E01
  1. Using SST, remove the parking brake shoe hold down compression spring.

    SST
    09718-00011  



8. REMOVE PARKING BRAKE SHOE STRUT


    C237818
  1. Pull the No. 1 parking brake shoe assembly towards the front of the vehicle by hand as shown in the illustration.



    C237819
  1. Remove the parking brake shoe strut.



9. REMOVE PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for Rear Side)


    C237820E01
  1. Using SST, remove the parking brake shoe hold down compression spring.

    SST
    09718-00011  



10. SEPARATE PARKING BRAKE SHOE LEVER


    C237821
  1. Expand the No. 1 and No. 2 parking brake shoe assemblies outward by hand and pull downward to separate them from the parking brake plate.

  1. Separate the parking brake shoe lever from the No. 2 parking brake shoe assembly.



11. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    C237822
  1. Remove the parking brake shoe adjusting screw set.



12. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    C237823
  1. Remove the No. 1 parking brake shoe assembly.



13. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Lower Side)


    C237824
  1. Remove the parking brake shoe return tension spring.



14. REMOVE PARKING BRAKE SHOE LEVER


    C237825
  1. Using needle-nose pliers, remove the parking brake shoe lever from the No. 3 parking brake cable assembly as shown in the illustration.



15. REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN


    C237826
  1. Remove the parking brake shoe hold down spring pin (for front side).



    C237827
  1. Remove the parking brake shoe hold down spring pin (for rear side).