Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER

REAR SPOILER > REMOVAL

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    B380679
  1. Remove the 13 clips and luggage compartment door cover.



2. REMOVE REAR SPOILER SUB-ASSEMBLY

HINT:
When removing the rear spoiler, heat the vehicle body and rear spoiler sub-assembly using a heat light.

Heating Temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Rear Spoiler Sub-assembly
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, rear spoiler sub-assembly excessively.



    B380991
  1. Apply protective tape around the rear spoiler sub-assembly as shown in the illustration.
    Text in Illustration 
    V100155
    Protective Tape



    B380992
  1. Remove the 2 nuts.



  1. Insert a piano wire between the vehicle body and rear spoiler sub-assembly.


    B380993E01


    Text in Illustration 
    *a
    Wooden Block
    *b
    Piano Wire
    *c
    Double-sided Tape
    *d
    Clip
    *e
    Stud Bolt
    -
    -

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the rear spoiler sub-assembly to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Disengage the 4 clips and remove the rear spoiler sub-assembly.

  1. Remove the 4 clips from the rear spoiler cover.

  1. Remove the 2 gaskets from the rear spoiler cover.

  1. Remove the 2 stud bolts from the rear spoiler cover.