REAR VIEW MONITOR SYSTEM > DIAGNOSIS SYSTEM |
| DESCRIPTION |
Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the rear view monitor system seems to be malfunctioning, use the GTS to check for malfunctions and to perform repairs.
| CHECK DLC3 |
Check the DLC3 (Click here).
| VEHICLE SIGNAL CHECK |
Check the item displayed for "REV" on the "Vehicle Signal Check Mode" screen.
| CAMERA SYNCHRONOUS ERROR HISTORY |
Check camera synchronous error history.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Navigation System / Utility / Camera Synchronous Error History.
When an item is stored for Camera Synchronous Error History, record it before repairing the navigation receiver assembly*1 or radio and display receiver assembly*2, and television camera assembly.
Clear camera synchronous error history.
When DTCs are cleared using any of the following operations, Camera Synchronous Error History will be cleared as well.
| VIDEO DEVICE CONNECTION CHECK |