ENGINE IMMOBILISER SYSTEM (w/ Smart Entry and Start System) > DTC CHECK / CLEAR |
| CHECK FOR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry & Start / DTC.
Check for DTCs.
| CHECK FOR ECM DTC (for 2GR-FE or 2AR-FE) |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Check for DTCs.
| CHECK FOR ECM DTC (for 6AR-FSE) |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Trouble Codes.
Check for DTCs.
| CLEAR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry & Start / DTC.
Clear the DTCs.
| CLEAR ECM DTC (for 2GR-FE or 2AR-FE) |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Clear the DTCs.
| CLEAR FOR ECM DTC (for 6AR-FSE) |
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Trouble Codes.
Check for DTCs.