Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET (for TMC, TMMR Made)

POWER OUTLET SOCKET (for TMC, TMMR Made) > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 POWER OUTLET SOCKET COVER (w/o Wireless Charger)


    B288892
  1. Engage the 2 claws to install the No. 2 power outlet socket cover as shown in the illustration.



2. INSTALL NO. 2 POWER OUTLET SOCKET ASSEMBLY (w/o Wireless Charger)


    B280062
  1. As shown in the illustration, align the protrusion of the No. 2 power outlet socket assembly and the notch of the No. 2 power outlet socket cover.

  1. Engage the 2 claws to install the No. 2 power outlet socket assembly to the No. 2 power outlet socket cover.



3. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY (w/o Wireless Charger)
  1. Connect the 2 connectors.

  1. Engage the clamp.



    B277990
  1. Engage the 2 guides and 4 clips as shown in the illustration.

  1. Install the upper console box sub-assembly with the 2 screws.



4. INSTALL NO. 1 POWER OUTLET SOCKET COVER (w/ Wireless Charger)


    E308852
  1. Engage the 2 claws to install the No. 1 power outlet socket cover as shown in the illustration.



5. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY (w/ Wireless Charger)


    E308854
  1. Engage the claw to install the No. 1 power outlet socket assembly as shown in the illustration.



6. INSTALL FRONT ASH RECEPTACLE ASSEMBLY (w/ Wireless Charger)
  1. Connect each connector.



    B384414
  1. Engage the 2 clips.

  1. Install the front ash receptacle assembly with the 2 screws <C>.



7. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (w/ Wireless Charger)


  1. for Blank Type:



      B386779
    1. Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.



  1. for 3 Switch Hole Type:

    1. Connect each connector.



    2. B386773
    3. Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.



8. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY
  1. Connect each connector.



    B280334
  1. Engage the 6 clips to install the rear console upper panel sub-assembly.

  1. Move the shift lever to P.



9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B281912
  1. Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.



10. INSTALL FRONT PANEL GARNISH RH


    B386774
  1. Engage the 3 clips and 8 guides to install the front panel garnish RH.



11. INSTALL FRONT PANEL GARNISH LH


    B386775
  1. Engage the 3 clips and 8 guides to install the front panel garnish LH.