POWER OUTLET SOCKET (for TMC, TMMR Made) > INSTALLATION |
| 1. INSTALL NO. 2 POWER OUTLET SOCKET COVER (w/o Wireless Charger) |
![]() |
Engage the 2 claws to install the No. 2 power outlet socket cover as shown in the illustration.
| 2. INSTALL NO. 2 POWER OUTLET SOCKET ASSEMBLY (w/o Wireless Charger) |
![]() |
As shown in the illustration, align the protrusion of the No. 2 power outlet socket assembly and the notch of the No. 2 power outlet socket cover.
Engage the 2 claws to install the No. 2 power outlet socket assembly to the No. 2 power outlet socket cover.
| 3. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY (w/o Wireless Charger) |
Connect the 2 connectors.
Engage the clamp.
![]() |
Engage the 2 guides and 4 clips as shown in the illustration.
Install the upper console box sub-assembly with the 2 screws.
| 4. INSTALL NO. 1 POWER OUTLET SOCKET COVER (w/ Wireless Charger) |
![]() |
Engage the 2 claws to install the No. 1 power outlet socket cover as shown in the illustration.
| 5. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY (w/ Wireless Charger) |
![]() |
Engage the claw to install the No. 1 power outlet socket assembly as shown in the illustration.
| 6. INSTALL FRONT ASH RECEPTACLE ASSEMBLY (w/ Wireless Charger) |
Connect each connector.
![]() |
Engage the 2 clips.
Install the front ash receptacle assembly with the 2 screws <D>.
| 7. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (w/ Wireless Charger) |
for Blank Type:
![]() |
Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.
for 3 Switch Hole Type:
Connect each connector.
![]() |
Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.
| 8. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Connect each connector.
![]() |
Engage the 6 clips to install the rear console upper panel sub-assembly.
Move the shift lever to P.
| 9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Turn the shift lever knob sub-assembly clockwise to install it.
![]() |
Engage the 2 claws to connect the shift hole cover sub-assembly as shown in the illustration.
| 10. INSTALL FRONT PANEL GARNISH RH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish RH.
| 11. INSTALL FRONT PANEL GARNISH LH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish LH.