Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET (for TMC, TMMR Made)

POWER OUTLET SOCKET (for TMC, TMMR Made) > REMOVAL

for Preparation Click here



1. REMOVE FRONT PANEL GARNISH LH


    B386768
  1. Disengage the 3 clips and 8 guides to remove the front panel garnish LH as shown in the illustration.



2. REMOVE FRONT PANEL GARNISH RH


    B386771
  1. Disengage the 3 clips and 8 guides to remove the front panel garnish RH.



3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B430424
  1. Disengage the 2 claws and disconnect the shift hole cover sub-assembly as shown in the illustration.



    B430426
  1. Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.



4. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY
  1. Move the shift lever to N.



  1. Disengage the 6 clips as shown in the illustration.


    B430428

  1. Disconnect each connector to remove the rear console upper panel sub-assembly.



5. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY (w/o Wireless Charger)


    B278005
  1. Remove the 2 screws.



    B277989
  1. Disengage the 4 clips and 2 guides as shown in the illustration.



    B280337
  1. Disengage the clamp.

  1. Disconnect the 2 connectors to remove the upper console box sub-assembly.



6. REMOVE NO. 2 POWER OUTLET SOCKET ASSEMBLY (w/o Wireless Charger)


    B280057
  1. Turn the No. 2 power outlet socket assembly as shown in the illustration to disengage the claw.



    B280058
  1. Using a screwdriver, disengage the claw, and then push in the No. 2 power outlet socket assembly until the protrusion of the No. 2 power outlet socket assembly comes into contact with the No. 2 power outlet socket cover.



    B280059
  1. As shown in the illustration, align the protrusion of the No. 2 power outlet socket assembly and the notch of the No. 2 power outlet socket cover.



    B280060
  1. Using a screwdriver, disengage the claw and remove the No. 2 power outlet socket assembly from the No. 2 power outlet socket cover as shown in the illustration.



7. REMOVE NO. 2 POWER OUTLET SOCKET COVER (w/o Wireless Charger)


    B280061
  1. Disengage the 2 claws and remove the No. 2 power outlet socket cover as shown in the illustration.



8. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (w/ Wireless Charger)


  1. for Blank Type:



      B386778
    1. Disengage the 2 claws and remove the front console upper panel garnish as shown in the illustration.



  1. for 3 Switch Hole Type:



      B386772
    1. Disengage the 2 claws as shown in the illustration.

    2. Disconnect each connector to remove the front console upper panel garnish.



9. REMOVE FRONT ASH RECEPTACLE ASSEMBLY (w/ Wireless Charger)


    B384412
  1. Remove the 2 screws <D>.



    B384413
  1. Disengage the 2 clips as shown in the illustration.

  1. Disconnect each connector to remove the front ash receptacle assembly.



10. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY (w/ Wireless Charger)


    E308853E01
  1. Using a screwdriver, disengage the claw and remove the No. 1 power outlet socket assembly as shown in the illustration.
    Text in Illustration 
    *a
    Protective Tape



11. REMOVE NO. 1 POWER OUTLET SOCKET COVER (w/ Wireless Charger)


    E308851
  1. Disengage the 2 claws and remove the No. 1 power outlet socket cover as shown in the illustration.