Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for TMMK Made)

REAR SEAT INNER BELT ASSEMBLY (for TMMK Made) > INSPECTION

for Preparation Click here



1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    B279526E01
  1. Before installing the rear seat inner with center belt assembly LH, check the ELR function.

    NOTICE:
    Do not disassemble the retractor.


    1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
      Text in Illustration 
      *1
      Retractor
      *a
      Unlocked
      *b
      Locked
      *c
      45°
      If the result is not as specified, replace the rear seat inner with center belt assembly LH.