Home › Power Source / Network ยท NETWORKING › LIN COMMUNICATION SYSTEM

LIN COMMUNICATION SYSTEM > DIAGNOSIS SYSTEM

for Preparation Click here



DESCRIPTION
The main body ECU (multiplex network body ECU) and certification ECU (smart key ECU assembly)* control the LIN communication system. LIN communication system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3).
When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.
*: w/ Smart Entry and Start System

CHECK DLC3
  1. Check the DLC3 (Click here).


INSPECT BATTERY VOLTAGE
  1. Measure the battery voltage.

    Standard Voltage:
    11 to 14 V

    1. If the voltage is below 11 V, recharge or replace the battery.