PARKING BRAKE ASSEMBLY (for TMMK Made) > INSPECTION |
| 1. INSPECT BRAKE DISC INSIDE DIAMETER |
![]() |
Using a brake drum gauge or an equivalent tool, measure the inside diameter of the disc.
| 2. INSPECT PARKING BRAKE SHOE LINING THICKNESS |
![]() |
Using a ruler, measure the thickness of the parking brake shoe lining.
| 3. INSPECT BRAKE DISC AND PARKING BRAKE SHOE LINING FOR PROPER CONTACT |
![]() |
Apply chalk to the inside surface of the disc, then slide the brake shoe against the disc to check the fit of the brake shoe lining to the disc.
If the contact between the disc and the brake shoe lining is incorrect, repair it using a brake shoe grinder or replace the parking brake shoe assembly.