Home › Engine / Hybrid System ยท CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH

CRUISE CONTROL MAIN SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL CRUISE CONTROL MAIN SWITCH
  1. Connect the connector.



    E301021
  1. Install the cruise control switch with the 2 screws shown in the illustration.

    Torque:
    2.4 N*m{ 24 kgf*cm , 21 in.*lbf }



2. INSTALL HORN BUTTON ASSEMBLY
for TMMK Made: (Click here)
for TMC, TMMR Made: (Click here)