LUMBAR SWITCH (for TMC, TMMR Made) > INSPECTION |
| 1. INSPECT LUMBAR FRONT POWER SEAT SWITCH |
![]() |
Measure the resistance according to the value(s) in the table below.
| *1 |
|
| *2 |
|
| *a | Component without harness connected (Lumbar Front Power Seat Switch) |
| Tester Connection | Switch Condition | Specified Condition |
| 3 - 5 | Hold | Below 1 Ω |
| 1 - 2 | ||
| 3 - 2 | Off | |
| 1 - 2 | ||
| 3 - 2 | Release | |
| 1 - 5 |
| Tester Connection | Switch Condition | Specified Condition |
| 1 - 5 | Hold | Below 1 Ω |
| 3 - 2 | ||
| 1 - 2 | Off | |
| 3 - 2 | ||
| 1 - 2 | Release | |
| 3 - 5 |