Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY (for TMMK Made)

REAR SEAT OUTER BELT ASSEMBLY (for TMMK Made) > ON-VEHICLE INSPECTION

for Preparation Click here


CAUTION:
Be sure to correctly follow the removal and installation procedures for the rear seat outer belt assembly.



1. INSPECT REAR SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)
  1. Visually check for defects with the rear seat outer belt assembly installed on the vehicle.

    1. The defects are as follows:

      1. Cuts on the rear seat outer belt assembly
      2. Small cracks on the rear seat outer belt assembly
      3. Significant discoloration on the rear seat outer belt assembly

      OK:
      No defects are found.

      HINT:
      If any of the defects is found, replace the rear seat outer belt assembly with a new one.



2. INSPECT REAR SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)
  1. Visually check for defects with the rear seat outer belt assembly removed from the vehicle.

    1. The defects are as follows:

      1. Cuts on the rear seat outer belt assembly
      2. Small cracks on the rear seat outer belt assembly
      3. Significant discoloration on the rear seat outer belt assembly
      4. Cracks or other damage to the connector

      OK:
      No defects are found.

      HINT:
      If any of the defects is found, replace the rear seat outer belt assembly with a new one.