DTC B2277 Detecting Vehicle Submersion |
| DTC Code | DTC Detection Condition | Trouble Area | DTC Output Confirmation Operation |
| B2277 | The water submersion detection circuit in the certification ECU (smart key ECU assembly) detects water submersion (1-trip detection logic*). |
| Wait 300 seconds after connecting the cable to the negative (-) battery terminal. |
| Vehicle Condition when Malfunction Detected | Fail-safe Function when Malfunction Detected |
| The engine switch cannot be turned off and the engine cannot be started. | - |
| DTC | Data List Item | Active Test Item |
| B2277 | - | - |
| 1.CHECK FOR DTC |
Clear the DTCs (Click here).
Turn the engine switch on (IG).
After 330 seconds have elapsed, check if the DTC has been output again.
|
| ||||
| OK | ||
| ||