Home › Engine / Hybrid System ยท 2AR-FE › COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK COOLING FAN MOTOR (for TMC, TMMR Made)
  1. Disconnect the cooling fan motor connector.



    A255570E01
  1. Check that the cooling fan motor operates smoothly when the battery is connected to the cooling fan motor connector.
    Text in Illustration 
    *a
    Component without harness connected
    (Cooling Fan Motor)

  1. Measure the current while the cooling fan motor is operating.

    Standard Current:
    Condition
    Specified Condition
    Battery voltage applied at 20°C (68°F)
    5.8 to 7.4 A

    If the result is not as specified, replace the cooling fan motor.

  1. Connect the cooling fan motor connector.



2. CHECK COOLING FAN MOTOR (for TMMK Made)
  1. Disconnect the cooling fan motor connector.



    A255569E02
  1. Check that the cooling fan motor operates smoothly when the battery is connected to the cooling fan motor connector.
    Text in Illustration 
    *a
    Component without harness connected
    (Cooling Fan Motor)

  1. Measure the current while the cooling fan motor is operating.

    Standard Current:
    Condition
    Specified Condition
    Battery voltage applied at 20°C (68°F)
    7.4 to 11.4 A

    If the result is not as specified, replace the cooling fan motor.

  1. Connect the cooling fan motor connector.



3. CHECK NO. 2 COOLING FAN MOTOR (for TMC, TMMR Made)
  1. Disconnect the No. 2 cooling fan motor connector.



    A255569E02
  1. Check that the No. 2 cooling fan motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.
    Text in Illustration 
    *a
    Component without harness connected
    (No. 2 Cooling Fan Motor)

  1. Measure the current while the No. 2 cooling fan motor is operating.

    Standard Current:
    Condition
    Specified Condition
    Battery voltage applied at 20°C (68°F)
    5.8 to 7.4 A

    If the result is not as specified, replace the No. 2 cooling fan motor.

  1. Connect the No. 2 cooling fan motor connector.



4. CHECK NO. 2 COOLING FAN MOTOR (for TMMK Made)
  1. Disconnect the No. 2 cooling fan motor connector.



    A255569E02
  1. Check that the No. 2 cooling fan motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.
    Text in Illustration 
    *a
    Component without harness connected
    (No. 2 Cooling Fan Motor)

  1. Measure the current while the No. 2 cooling fan motor is operating.

    Standard Current:
    Condition
    Specified Condition
    Battery voltage applied at 20°C (68°F)
    7.4 to 11.4 A

    If the result is not as specified, replace the No. 2 cooling fan motor.

  1. Connect the No. 2 cooling fan motor connector.