Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM (for TMMK Made)

DTC    B1000/31    Center Airbag Sensor Assembly Malfunction

for Preparation Click here


DESCRIPTION

The airbag sensor assembly consists of the deceleration sensor, safing sensor, drive circuit, diagnosis circuit, ignition control, etc.
If the airbag sensor assembly receives signals from the deceleration sensor, it determines whether the airbag squib and pretensioner squib should be activated.
DTC B1000/31 is stored when a malfunction is detected in the airbag sensor assembly.

DTC No.
DTC Detection Condition
Trouble Area
B1000/31
Airbag sensor assembly malfunction
Airbag sensor assembly

INSPECTION PROCEDURE

1.CHECK DTC
  1. Check for DTCs (Click here).

    Result:
    Result
    Proceed to
    DTC B1000/31 is output
    A
    DTC B1000/31 and other DTCs are output
    B

NOTICE:
If only DTC B1000/31 is output, do not clear the DTCs, replace the airbag sensor assembly.

HINT:
If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.



B
GO TO DIAGNOSTIC TROUBLE CODE CHART (Click here)
A

REPLACE AIRBAG SENSOR ASSEMBLY (Click here)