Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION SYSTEM (for TMMK Made)

OCCUPANT CLASSIFICATION SYSTEM (for TMMK Made) > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK
  1. Turn the engine switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the engine switch on (IG).

  4. Turn the GTS on.

  5. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.

  6. Check for DTCs by following the prompts on the GTS screen.

    HINT:
    Refer to the GTS operator's manual for further details.


DTC CLEAR
  1. Turn the engine switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the engine switch on (IG).

  4. Turn the GTS on.

  5. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.

  6. Clear the DTCs by following the prompts on the GTS screen.

    HINT:
    Refer to the GTS operator's manual for further details.