Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR (for TMC, TMMR Made)

REAR STABILIZER BAR (for TMC, TMMR Made) > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEELS


2. REMOVE NO. 2 FLOOR UNDER COVER


  1. for TMC Made:



      C310499
    1. Remove the screw and 2 clips.
      Text in Illustration 
      V100135
      Nut (attached to under cover)
      V100136
      Screw

    2. Disengage the 6 nuts and remove the No. 2 floor under cover.

      HINT:
      The 6 nuts will remain attached to the No. 2 floor under cover.



  1. for TMMR Made:



      C309401
    1. Remove the 2 clips.
      Text in Illustration 
      V100135
      Nut (attached to under cover)

    2. Disengage the 6 nuts and remove the No. 2 floor under cover.

      HINT:
      The 6 nuts will remain attached to the No. 2 floor under cover.



3. REMOVE NO. 1 FLOOR UNDER COVER


  1. for TMC Made:



      C310498
    1. Remove the screw.
      Text in Illustration 
      V100135
      Nut (attached to under cover)
      V100136
      Screw

    2. Disengage the 5 nuts and 2 clips, and remove the No. 1 floor under cover.

      HINT:
      Rotate the clips to disengage them. The 5 nuts and 2 clips will remain attached to the No. 1 floor under cover.



  1. for TMMR Made:



      C309402
    1. Disengage the 5 nuts and 2 clips, and remove the No. 1 floor under cover.
      Text in Illustration 
      V100135
      Nut (attached to under cover)

      HINT:
      Rotate the clips to disengage them. The 5 nuts and 2 clips will remain attached to the No. 1 floor under cover.



4. REMOVE REAR STABILIZER LINK ASSEMBLY LH


    C239069
  1. Remove the nut and separate the rear stabilizer link assembly LH from the rear shock absorber assembly.
    If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.



    C241264
  1. Remove the nut and rear stabilizer link assembly LH from the rear stabilizer bar.
    If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.



5. REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT:
Perform the same procedure as for the LH side.



6. REMOVE REAR STABILIZER BAR


    C240548
  1. Remove the 4 bolts, rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets and 2 rear stabilizer bushings.



7. REMOVE REAR NO. 1 STABILIZER BAR BRACKET
  1. Remove the 2 rear No. 1 stabilizer bar brackets from the rear stabilizer bar.



8. REMOVE REAR STABILIZER BUSHING
  1. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.