Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION ECU (for TMMK Made)

OCCUPANT CLASSIFICATION ECU (for TMMK Made) > REMOVAL

for Preparation Click here



1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing (Click here).



2. REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat)
(Click here)


3. REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat)

HINT:
Use the same procedure for the RH side and LH side.
(Click here)



4. REMOVE OCCUPANT DETECTION ECU


    B278816E01
  1. Disconnect the 2 connectors.

  1. Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.
    Text in Illustration 
    *1
    Protective Tape