Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM

DTC    B124A    Automatic High Beam Mirror

DTC    B124C    Automatic High Beam Camera

for Preparation Click here


DESCRIPTION

These DTCs are stored when the main body ECU (multiplex network body ECU) detects a malfunction in the inner rear view mirror assembly (automatic high beam sensor).

DTC No.
DTC Detection Condition
Trouble Area
B124A
Malfunction in inner rear view mirror assembly
Inner rear view mirror assembly
B124C
Malfunction in camera (inner rear view mirror assembly)
Inner rear view mirror assembly

WIRING DIAGRAM


E302711E03


INSPECTION PROCEDURE

1.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC B124A or B124C is not output.



NG
REPLACE INNER REAR VIEW MIRROR ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)