Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for TMC, TMMR Made)

FRONT SEAT INNER BELT ASSEMBLY (for TMC, TMMR Made) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver)


    B271232E04
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 - 3
    Driver seat belt unfastened
    Below 1 Ω
    2 - 3
    Driver seat belt fastened
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Inner Belt Assembly (for Driver))
    If the result is not as specified, replace the front seat inner belt assembly (for driver).