FRONT SEAT INNER BELT ASSEMBLY (for TMC, TMMR Made) > INSPECTION |
| 1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Door) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 2 - 3 | Driver seat belt unfastened | Below 1 Ω |
| 2 - 3 | Driver seat belt fastened | 10 kΩ or higher |
| *a | Component without harness connected (Front Seat Inner Belt Assembly (for Driver)) |
| 2. FRONT SEAT INNER BELT ASSEMBLY FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 2 - 3 | Front passenger seat belt unfastened | Below 1 Ω |
| 2 - 3 | Front passenger seat belt fastened | 10 kΩ or higher |
| *a | Component without harness connected (Front Seat Inner Belt Assembly (for Front passenger)) |