Home › Vehicle Interior › SEAT › FRONT SEATBACK HEATER (for TMMK Made)

FRONT SEATBACK HEATER (for TMMK Made) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT BACK HEATER ASSEMBLY LH


    B081969E09
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Back Heater Assembly LH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    3.26 to 4 Ω

    If the result is not as specified, replace the front seat back heater assembly LH.



2. INSPECT FRONT SEAT BACK HEATER ASSEMBLY RH


    B081969E09
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Back Heater Assembly RH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    3.26 to 4 Ω

    If the result is not as specified, replace the front seat back heater assembly RH.