Home › Drivetrain ยท U760E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM

AUTOMATIC TRANSAXLE SYSTEM > TERMINALS OF ECM

for Preparation Click here



ECM
*: w/ Shift Paddle Switch

C239275E01

HINT:
The standard voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage for that pair of terminals, displayed in the "Specified Condition" column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
E26-3 (SL) - E26-16 (E1)
R - BR
Shift solenoid valve (SL) signal
All gears
(Lock-up on / Flex lock-up on)
11 to 14 V
E26-5 (SL1+) - E26-4 (SL1-)
V - B
Shift solenoid valve (SL1) signal
1st, 2nd, 3rd or 4th gear
Pulse generation
E26-7 (SLU+) - E26-6 (SLU-)
L - G
Shift solenoid valve (SLU) signal
All gears
(Lock-up on / Flex lock-up on)
Pulse generation
E26-9 (SL4+) - E26-8 (SL4-)
V - W
Shift solenoid valve (SL4) signal
3rd or 5th gear
Pulse generation
E26-11 (SL3+) - E26-10 (SL3-)
L - P
Shift solenoid valve (SL3) signal
2nd or 6th gear
Pulse generation
E26-13 (SL2+) - E26-12 (SL2-)
LG - GR
Shift solenoid valve (SL2) signal
4th, 5th or 6th gear
Pulse generation
E26-15 (SLT+) - E26-14 (SLT-)
W - Y
Shift solenoid valve (SLT) signal
Engine idling
Pulse generation
E26-63 (NSW) - E26-16 (E1)
LG - BR
Park/neutral position switch assembly signal
Ignition switch ON and shift lever in P or N
Below 2 V
Ignition switch ON and shift lever not in P or N
11 to 14 V
E26-66 (R) - E26-16 (E1)
GR - BR
R shift position switch signal
Ignition switch ON and shift lever in R
11 to 14 V
Ignition switch ON and shift lever not in R
Below 1 V
E26-67 (D) - E26-16 (E1)
G - BR
D shift position switch signal
Ignition switch ON and shift lever in D or S
11 to 14 V
Ignition switch ON and shift lever not in D or S
Below 1 V
E26-70 (P) - E26-16 (E1)
B - BR
P shift position switch signal
Ignition switch ON and shift lever in P
11 to 14 V
Ignition switch ON and shift lever not in P
Below 1 V
E26-71 (N) - E26-16 (E1)
L - BR
N shift position switch signal
Ignition switch ON and shift lever in N
11 to 14 V
Ignition switch ON and shift lever not in N
Below 1 V
E26-116 (NTB) - E26-16 (E1)
B - BR
Power source for sensor (fixed voltage)
Ignition switch ON
11 to 14 V
E26-115 (NTO) - E26-16 (E1)
R - BR
Speed sensor (NT) signal
Engine idle speed
Pulse generation
E26-118 (NCB) - E26-16 (E1)
LG - BR
Power source for sensor (fixed voltage)
Ignition switch ON
11 to 14 V
E26-117 (NCO) - E26-16 (E1)
W - BR
Speed sensor (NC) signal
Vehicle driving
Pulse generation
E26-120 (THO1) - E26-119 (ETHO)
LG - P
ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
A25-27 (S) - E26-16 (E1)
G - BR
S shift position switch signal
Ignition switch ON and shift lever in S
11 to 14 V
Ignition switch ON and shift lever not in S
Below 1 V
A25-42 (SFTU) - E26-16 (E1)
R - BR
Up shift switch signal
Ignition switch ON and shift lever in S
11 to 14 V
Ignition switch ON and shift lever in "+" (Up shift)
Below 1 V
Ignition switch ON and "+" shift paddle operated (Up shift)*
Below 1 V
A25-43 (SFTD) - E26-16 (E1)
V - BR
Down shift switch signal
Ignition switch ON and shift lever in S
11 to 14 V
Ignition switch ON and shift lever in "-" (Down shift)
Below 1 V
Ignition switch ON and "-" shift paddle operated (Down shift)*
Below 1 V