INNER REAR VIEW MIRROR (for TMC, TMMR Made) > INSPECTION |
| 1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY |
Inspect the operation of the electrochromic inner mirror.

| *1 | Forward Sensor | *2 | Black Colored Tape |
| *3 | Bright | *4 | Dark |
| *5 | Battery | - | - |
| *a | Component without harness connected (Inner Rear View Mirror Assembly) | - | - |
Connect a positive (+) lead from the battery to terminal 4 and a negative (-) lead to terminal 1.
Press the AUTO switch.
Attach black colored tape to the forward sensor to prevent it from sensing.
Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.