Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR (for TMMK Made)

INNER REAR VIEW MIRROR (for TMMK Made) > INSPECTION

for Preparation Click here



1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY


  1. Inspect the operation of the electrochromic inner mirror.


    B338592E03


    Text in Illustration 
    *1
    Forward Sensor
    *2
    Black Colored Tape
    *3
    Bright
    *4
    Dark
    *5
    Battery
    -
    -
    *a
    Component without harness connected
    (Inner Rear View Mirror Assembly)
    -
    -

    1. Connect a positive (+) lead from the battery to terminal 6 and a negative (-) lead to terminal 3.

    2. Press the EC switch.

    3. Attach black colored tape to the forward sensor to prevent it from sensing.

    4. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

      Standard:
      Mirror surface changes from bright to dark.

      If the result is not as specified, replace the inner rear view mirror assembly.