Home › Drivetrain ยท U660E AUTOMATIC TRANSMISSION / TRANSAXLE › ATF TEMPERATURE SENSOR

ATF TEMPERATURE SENSOR > REMOVAL

for Preparation Click here



1. REMOVE VALVE BODY OIL STRAINER ASSEMBLY



2. REMOVE ATF TEMPERATURE SENSOR ASSEMBLY


    C139240E09
  1. Disconnect the connector.

  1. Remove the 4 bolts, ATF temperature sensor assembly and clamp from the transmission valve body assembly.
    Text in Illustration 
    *a
    Clamp



    C138520E03
  1. Remove the O-ring from the ATF temperature sensor assembly.
    Text in Illustration 
    *1
    O-ring