Home › Drivetrain ยท U761E AUTOMATIC TRANSMISSION / TRANSAXLE › VALVE BODY ASSEMBLY

VALVE BODY ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY
(Click here)


2. REMOVE TORQUE CONVERTER ASSEMBLY


    C201724
  1. Remove the torque converter assembly from the automatic transaxle assembly.



3. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY


    C317149
  1. Remove the 19 bolts and automatic transaxle oil pan sub-assembly from the transaxle case sub-assembly.

    NOTICE:
    Some fluid will remain in the automatic transaxle oil pan sub-assembly. Remove all of the bolts and carefully remove the automatic transaxle oil pan sub-assembly.



4. REMOVE AUTOMATIC TRANSAXLE OIL PAN GASKET
  1. Remove the automatic transaxle oil pan gasket from the automatic transaxle oil pan sub-assembly.



5. REMOVE TRANSMISSION OIL CLEANER MAGNET


    C317150E01
  1. Remove the 4 transmission oil cleaner magnets from the automatic transaxle oil pan sub-assembly.
    Text in Illustration 
    *1
    Transmission Oil Cleaner Magnet



6. INSPECT TRANSMISSION OIL CLEANER MAGNET


    C138722
  1. Use the removed transmission oil cleaner magnets to collect any steel chips. Examine the chips and particles in the automatic transaxle oil pan sub-assembly and on the transmission oil cleaner magnets to determine what type of wear might be found in the automatic transaxle assembly.
    Result 
    Steel (magnetic)
    Brass (non-magnetic)
    Bearing, gear and plate wear
    Bushing wear



7. REMOVE VALVE BODY OIL STRAINER ASSEMBLY


    C201702
  1. Remove the 2 bolts and valve body oil strainer assembly from the transmission valve body assembly.



    C317151E01
  1. Remove the O-ring from the valve body oil strainer assembly.
    Text in Illustration 
    *1
    O-ring



8. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


    C201704
  1. Remove the 11 bolts and transmission valve body assembly from the transaxle case sub-assembly.

    NOTICE:
    When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and transaxle case sub-assembly to interfere with each other.



9. REMOVE TRANSAXLE CASE GASKET


    C201316
  1. Remove the 2 transaxle case gaskets from the transaxle case sub-assembly.



10. REMOVE MANUAL VALVE


    C201705
  1. Remove the manual valve from the transmission valve body assembly.