Home › Engine / Hybrid System ยท 6AR-FSE › COOLING › THERMOSTAT

THERMOSTAT > INSPECTION

for Preparation Click here



1. INSPECT THERMOSTAT

HINT:
P013560E01
The valve opening temperature is inscribed on the thermostat.

  1. Immerse the thermostat in water, and then gradually heat the water.

  1. Check that the valve of the thermostat opens at the specified temperature.

    Standard Valve Opening Temperature:
    80 to 84°C (176 to 183°F)

    If the result is not as specified, replace the thermostat.



    A255568E01
  1. Check the valve lift.
    Text in Illustration 
    *a
    Valve Lift

    Standard Valve Lift:
    10 mm (0.394 in.) or more at 95°C (203°F)

    If the result is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is at low temperature (below 77°C (171°F)).
    If not fully closed, replace the thermostat.