Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE DOOR HINGE TORSION BAR (for TMC, TMMR Made)

LUGGAGE DOOR HINGE TORSION BAR (for TMC, TMMR Made) > REMOVAL

for Preparation Click here


NOTICE:
After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.



1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
  1. Remove the luggage compartment floor mat.



2. REMOVE BAGGAGE HOLDER NET (w/ Partition Net)
  1. Remove the baggage holder net.



3. REMOVE REAR FLOOR FINISH PLATE


    B294805
  1. Remove the 5 clips.



    B294806
  1. Disengage the 4 clips and remove the rear floor finish plate.



4. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    B281706E01
  1. Push the 2 pins and remove the 2 No. 1 luggage compartment trim hooks.
    Text in Illustration 
    *1
    Pin



5. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH


    B281707
  1. Remove the 3 clips.

  1. Disengage the fastener and remove the luggage compartment inner trim cover LH.



6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH


    B281708
  1. Remove the 3 clips.

  1. Disengage the fastener and remove the luggage compartment inner trim cover RH.



7. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    B287071
  1. Disengage the 4 claws and remove the luggage compartment door hinge cover LH.



8. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

HINT:
Use the same procedure as for the LH side.



9. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH


  1. for Fold Down Seat Type:



      B279214E01
    1. Disengage the hook in the order indicated in the illustration and disconnect the rear seatback lock assembly LH (rear seat lock control cable LH).

      HINT:
      Use the same procedure as for the LH side and the RH side.



    B281724E01
  1. Put protective tape around the luggage door hinge.
    Text in Illustration 
    *1
    Protective Tape



    B280573E01
  1. Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and the left side of the vehicle body as shown in the illustration.

    SST
    09804-24010  



    B280571
  1. Disengage the 2 claws as shown in the illustration.



    B280575
  1. Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.



    B280577
  1. Remove the luggage door hinge torsion bar LH from the right side of the vehicle body as shown in the illustration.



10. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH


    B281709E01
  1. Put protective tape around the luggage door hinge.
    Text in Illustration 
    *1
    Protective Tape



    B280579E01
  1. Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and the right side of the vehicle body as shown in the illustration.

    SST
    09804-24010  



    B280581
  1. Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.



    B280583
  1. Remove the luggage door hinge torsion bar RH from the left side of the vehicle body as shown in the illustration.



11. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    B280585
  1. Remove the luggage compartment door torsion bar support as shown in the illustration.

    NOTICE:
    Make sure to replace the luggage compartment door torsion bar support with a new one.